MikroTik Trening

Organizator: eWireless
Predavači: MikroTIK sertifikovani treneri

KONTAKT:

– Više informacija na www.mikrotiktrening.rs
– Telefon za informacije: 022/810-810 , 022/555-102
– E-mail za informacije:  office@ewireless.rs

O TRENINZIMA:

MikroTik Certified Network Associate
Training outline

Suggested duration:4 days of 6.5 hours each.
Objectives:By the end of this training session, the student will be familiar with RouterOS software and RouterBoard products.
He will also be able to configure, manage, do basic troubleshooting of a MikroTik router and provide basic services to clients.
Target Audience:Network engineers and technicians wanting to deploy and support:
- Corporate networks
- Client CPEs (WISPs and ISPs)
Course prerequisites:The student must have a good understanding of TCP/IP and subnetting.

The course material is separated in modules, each of which is ended with a laboratory whose goal is to reinforce the material that has been demonstrated.

Preuzmite program treninga

MikroTik Certified Routing Engineer
MTCRE training outline
Course prerequisites – MTCNA certificate

TitleObjective
Static Routing· More specific routes
· ECMP + LAB
· How to force gateway over specific interface
· Gateway reachability check and route distance + LAB
· Routing mark and route policy + LAB
· Recursive next-hop and scope/target-scope usage +LAB
Point to point addressing· PtP address configuration + LAB
VPN· What is VPN?
· Different types of VPN
· Site to site connectivity with tunnels (IPIP, EoIP, PPTP, SSTP, L2TP) + LAB
· Vlan and it's usage
· QinQ implementation + LAB
· Vlan and managed switch
· Vlan and switch chip configuration on Rbs + LAB
OSPF· What is OSPF?
· How OSPF protocol works (Hello protocol, Database distribution and LSA types explained)
· OSPF network structure (Areas, Router types)
· OSPF neighbors and neighbor states (DR and BDR election) + LAB
· External Route Distribution methods (type1, type2) + LAB
· Interface cost and interface types (broadcast, NBMA, etc.) + LAB
· SPT calculation algorithm
· OSPF and multicast (problems with NBMA)
· Stub, NSSA and area ranges (route aggregation) + LAB
· Virtual links, usage and limitations + LAB
· OSPF routing filters and limitations + LAB

Preuzmite program treninga

MikroTik Certified Wireless Engineer
MTCWE training outline
Course prerequisites – MTCNA certificate

TitleObjective
Wireless Installationso Wireless routers
o RouterBoard Hardware
o Wireless cards
o Antenna types
Wireless Standardo 802.11 a/b/g/n
o Bands and channel width
o Frequencies
Wireless ToolsWireless Tools + LAB
o Scan
o Frequency usage
o Spectral Scan/History
o Snooper
o Align
o Sniffer
Wireless Troubleshootingo Troubleshooting wireless clients + LAB
o Registration table analysis
o Ack-Timeout/Distance
o CCQ
o TX/RX Signal Strength
o Frames and HW-frames
o Data-rates
Wireless Advanced Settingso Advanced Wireless Tab settings + LAB
o HW-retries
o HW-protection
o Adaptive-noise-immunity
o WMM
o Country regulation settings
o TX-power + LAB
o Virtual-AP
802.11no 802.11n wireless protocol + LAB
o Features
o Data Rates
o Channel bonding
o Frame Aggregation
o TX-power for N cards
o Chain settings
o Wireless link debugging
Wireless Securityo Wireless Security Measures + LAB
o Access Management
o Access-List/Connect-List
o RADIUS
o Authentication
o Encryption
o EAP
o Management Frame Protection
WDS and MESHo Wireless WDS protocol + LAB
o Dynamic/Static WDS
o RSTP Bridge
o Wireless MESH + LAB
o HWMP+ Mesh
Wireless Bridgingo Wireless Transparent Bridge + LAB
o WDS bridging
o AP/Station-WDS
o Pseudobridge
o MPLS/VPLS tunnel
Nstreme Protocolo MikroTik Wireless Nstreme Protocol + LAB
o Features
o Configuration options
o Nstreme Dual
o Troubleshooting
Nv2 Protocolo MikroTik Wireless Nv2 Protocol + LAB
o Features
o Configuration options
o Troubleshooting

Preuzmite program treninga

MikroTik Certified Traffic Control Engineer
MTCTCE training outline
Course prerequisites – MTCNA certificate

TitleObjective
Packet flow diagram· Why this diagram is necessary?
· Full overview of all things covered by diagram
· Simple examples how packet travels through the diagram (routing, bridging, connection to router etc.) + LAB
· More complex examples of diagram usage + LAB
Firewall filter/nat/mangle· Connection tracking
· Filter + LAB
- chains (default/custom)
- all rule "actions" covered
- most common rule "conditions" covered
· NAT + LAB
- chains (default/custom)
- all rule "actions" covered
- most common rule "conditions" covered
- NAT helpers
· Mangle + LAB
- chains (default/custom)
- all rule "actions" covered
- most common rule "conditions" covered
· Some complicated rule "conditions" covered ("advanced", "extra" tab) + LAB
· uPNP
Quality of Service· HTB
- HTB general information
- HTB implementation (queue tree)
- HTB structure + LAB
- HTB Dual Limitation + LAB
- HTB priority + LAB
· Burst + LAB
· Queue types
- FIFO + LAB
- SFQ + LAB
- RED + LAB
- PCQ + several LABs
- queue size + LAB
· Simple queues + LAB
· Simple queue and queue tree interaction
DNS client/cache· Basic configuration + LAB
· Static DNS Entry + LAB
DHCP client/relay/server· DHCP communication analysis
· DHCP-client identification/ configuration + LAB
· DHCP server configuration: + LAB
- DHCP networks
- DHCP options (build-in and custom)
- IP Poolo advanced DHCP
· DHCP relay configuration + LAB
Web Proxy· Basic configuration
· Proxy rule lists
- Access list + LAB
- Direct Access list + LAB
- Cache list + LAB
· Regular expression + LAB

Preuzmite program treninga

MikroTik Certified User Management Engineer
MTCUME training outline
Course prerequisites – MTCNA certificate

TitleObjective
Module 1
PPP
• PPP Profile + LAB;
• Local and Remote addresses;
• Incoming/Outgoing Filters;
• Address List;
• Change TCP-MSS;
• Use Encryption;
• Session Timeout;
• Rate-Limit configuration;
• Only-one setting;
• PPP Secret + LAB;
• Service and Profile;
• Local and Remote address;
• Routes configuration;
• Limit Bytes In/Limit Bytes Out configuration;
• IP Pool;
• Set addresses ranges;
• Next Pool options;
Module 2
PPTP/L2TP
• PPTP and L2TP;
• Theory;
• Comparison;
• PPTP Client configuration + LAB;
• Client Setup;
• Set profile;
• Dial-on-Demand;
• Add Default Route and static routes;
• PPTP Server configuration + LAB;
• Enable server;
• Setup profiles;
• Add clients to /ppp secret;
• Set static interfaces for clients;
• L2TP Client configuration + LAB;
• Client setup;
• Configure profile;
• Dial-on-Demand;
• Add Default Route and static routes;
• PPTP Server configuration + LAB;
• Enable server;
• Set profiles;
• Add clients to /ppp secret;
• Set Static interfaces for clients;
Module 3
PPPoE
• PPPoE server and client;
• Theory;
• Usage environment;
• Comparison to othe PPP protocols;
• PPPoE client configuration + LAB;
• Client setup;
• Select interface;
• Service name
• Configure profile;
• PPPoE Server configuration + LAB;
• Enable PPPoE server;
• Set profiles;
• Add clients to /ppp secret;
• Add Static interfaces for clients;
• Secure server by removing any IP address from PPPoE server interface;
• Encryption + LAB;
• Set profile without encryption;
• Set profile with encryption;
• Configure PPPoE client without encryption;
• Interface ECMP;
• set ECMP routes for ppp interfaces;
Module 4
PPP Bridging
• L2TP and EoIP + LAB;
• Set L2TP tunnel;
• Set EoIP tunnel;
• Create bridge and add necessary interfaces to ports;
• Confirm you have Ethernet connectivity between remote nodes;
• L2TP and VPLS + LAB;
• Set L2TP tunnel;
• Set VPLS tunnel;
• Create bridge and add necessary interfaces to ports;
• L2TP and BCP + LAB;
• Set L2TP tunnel;
• Use BCP to bridge PPP interface;
• Add to bridge necessary interface;
• Multilink Protocol;
• Enable Multilink by specifying correct MRRU settings;
• Disable Mangle rules for MSS adjustment;
• MLPPP [optional];
• Setup client and specify multiple interfaces for one client;
• Set PPPPoE server with MLPPP support;
Module 5
IPSec
• Introduction;
• Theory and concepts;
• Comparison to other VPN protocols;
• IPSec Peer;
• Use different authentication methods;
• IPSec exchange modes;
• Encryption and Hash algorithms;
• NAT-Traversal;
• Lifetime and Lifebytes;
• DPD protocol;
• Policy;
• IPsec protocol and action;
• Tunnels;
• Generate dynamic Policy;
• Proposal;
• Encryption and Authentication algorithms;
• Lifetime;
• PFS;
• Installed-SA;
• Flush SA;
• Create IPSec between two routers with NAT + LAB;
• Set peer;
• Set policy;
• Set NAT rules;
• Confirm the secure link is established;
Module 6
HotSpot
• Introduction;
• Concepts;
• Usage environments;
• Setup HotSpot with default settings + LAB;
• HotSpot Login Methods + LAB;
• HTTP CHAP/PAP;
• MAC;
• Cookie;
• HTTPS;
• Trial;
• RADIUS
• Users + LAB;
• Add users;
• Set MAC-address for user;
• Set MAC-address for username;
• Limit Uptime and Limit Bytes In/Out;
• Reset limits for user;
• Monitor Users;
• Host Table;
• Active Table;
• SNMP for users;
• Profile + LAB;
• Keepalive timeout;
• Shared users;
• Rate-Limit;
• Address-list;
• Incoming/Outgoing filter;
• Incoming/Outgoing Packet Mark;
• Bypass HotSpot;
• walled-garden;
• walled-garden ip;
• ip-binding;
• Customize HotSpot + LAB;
• Advertisement;
• Customize pages;
Module 7
RADIUS
• RADIUS client + LAB;
• add radius client;
• set service;
• use-radius for the specific service;
• RADIUS server;
• User Manager + LAB;
• Install the latest user-manager;
• Add routers;
• Add users;
• Set profile;
• RADIUS incoming

Preuzmite program treninga

MikroTik Certified Inter-networking Engineer
MTCINE training outline
Course prerequisites – MTCNA and MTCRE certificates

TitleObjective
BGP· What is Autonomous System
· What is BGP?
· Path Vector algorithm
· BGP Transport and packet types
· iBGP and eBGP + LAB
· Stub network scenarios and private AS removal + LAB
· Non-stub scenarios + LAB
· iBGP and eBGP multihop and loopback usage + LAB
· Route distribution and routing filters +LAB
· BGP best path selection algorithm
· BGP prefix attributes and their usage + LAB
· BGP route reflectors and confederations + LAB
MPLS· What is MPLS (basics)
· Static Label Mapping + LAB
· Label Distribution (LDP) + LAB
· What is Penultimate-hop-popping
· MPLS traceroute differences
· LDP based VPLS tunnels + LAB
· What is Bridge Split Horizon + LAB
· VPLS Control Word (CW) usage
· L2MTU importance and MPLS fragmentation
· BGP based VPLS + LAB
· VRF and route leaking + LAB
· L3VPN (BGP based Layer3 tunnels) + LAB
· OSPF as CE-PE protocol
Traffic Engineering· What is traffic engineering and how it works
· RSVP, Static path, dynamic path (CSPF) + LAB
· Bandwidth allocation and bandwidth limitation differences and settings + LAB

Preuzmite program treninga

* Ispit se polaže na zvaničnoj stranici Mikrotik-a – http://www.mikrotik.com  na engleskom jeziku (podrazumeva se osnovno poznavanje engleskog jezika), dok su predavanja na srpskom jeziku. Nakon položenog ispita dobijate sertifikat iz položene oblasti.

OBAVEZE KANDIDATA:

  • Posedovanje sopstvenog LAPTOP-a sa wireless karticom – neophodno za trening
  • Otvoren nalog na MikroTik-ovom sajtu (https://www.mikrotik.com/client)

KOME JE NAMENJEN:

MikroTik trening nastave je za ISP, WISP administratore, sistem inženjere, integratore, menadžere i sve one koji bi želeli naučiti o upravljanju žičanim i bežičnim mrežama pomoću MikroTik RouterOS.

Prijavite se!